Yokogawa DAQWORX Uživatelský manuál stáhnout pdf (Strana 90)

4-28

IM WX104-01E

4.11 Saving Display Template

Saving Templates

1. Click here [File] - [Save Template]

The currently displayed settings are saved as a template le to the same folder as the

displayed data.

Using Templates

1. Click here [File] - [Use Template]

If the currently displayed data le is not accompanied by its display settings le, it is

displayed according to the setting information of the template le residing in the same

folder.

If the currently displayed data le is accompanied by its display settings le, it is

displayed according to the setting information of the display settings le.

If you do not wish to use the template, select File > Use

Template again to clear the

check mark.

The template file is saved with the name default.tdx in the folder of the currently

displayed data. When using a template file, the template file residing in the same folder

as the displayed data is used. The setting information saved to the template file is as

follows.

• Print comment • The background and grid color of the

waveform display area

• Y-axis zone setting • The width of the zone display area of

each group

• ON/OFF condition of the clipping of the displayed

waveform

• The active waveform

• Settings specified in the General Display Settings • The height of the data overview of each

group

• Zoom rate of the time axis • Show/Hide condition of the zone display

area

• Display mode of the time axis (absolute/relative) • Selected group

• Waveform display area • ON/OFF condition of the alarm display

• Grid type • Position of the display screen

• The channel identification string mode (channel/tag)

• ON/OFF condition of file information items (see

section 4.1)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 335 336

Žádné komentáře

Yokogawa DAQWORX Uživatelský manuál Strana 90