Yokogawa µR20000 Uživatelský manuál stáhnout pdf (Strana 31)

3-18 SM 04P01B01-01E

Loop Back Test (Ethernet Communication Interface, /C7)

● Procedures

This test performed when the /C7 option is specified.

1. Connect the recorder to the network.

2. Turn ON the power switch while pressing the

and

CH UP

keys. Menu = A/D

Adjust is displayed.

3. Confirm that the indicator on the left of the Ethernet port on the recorder

illuminates.

4. Choose Menu = Test, and press the

key.

3. Choose Test = Loop Back and press the key.

Confirm that OK is displayed. If ERROR is displayed, check the connection to

the network.

* Select using the key. You can hold down the SHIFT key while pressing key to reverse the

key’s action.

Z-Fold Chart Paper End Detection

● Procedures

This test performed when the /F1 option is specified. Confirm the status below.

Status Criterion

Chart paper present The CHART END indicator is out

No chart paper present The CHART END indicator illuminates

Other Functions in Test Mode

In addition to the tests described up to now, you can perform the following tests in test

mode. They are not described in detail in this manual.

Menu Description

Test > Print > Analog Tests the analog recorder recording quality.

Test > Print > Plotter Tests the plotter pen recording quality (pen model).

Test > Print > Pen Hold Aligns the pens to the position when the recorder is shipped

(pen model).

Test > Memory Performs a test of the SRAM. .

Test > Version Displays the firmware version.

Test > Ram Clear Initializes the setup data.

3.4 Test Procedures

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 82 83

Žádné komentáře

Yokogawa µR20000 Uživatelský manuál Strana 31