Yokogawa Standalone MW100 Uživatelský manuál stáhnout pdf (Strana 187)

3-65

IM MW100-01E

Setting and Data acquisition

App

Index

File selection screen

Selects the report file to be displayed in the graph.

Click the OK button to return to the Report - Graph screen.

Channel selection screen

Selects the channels and tag names displayed in the graph.

Up to 10 channels can be selected. You can clear all selections with Clear All button

(Firmware version R3.02 or later).

Click the OK button to return to the Report - Graph screen.

Setting Mode

Display Settings

Tag Settings

Enter Tag names to assign to measurement and MATH channels. If the tag name display

is enabled, the tag names specified here are displayed.

For the procedure to switch to the tag name display, see “Other Settings” in this section.

From the top screen, click Display Setting > Channel Tag Setting.

Select the tag number group you wish to set from the Channel List list.

Enter a tag name in the Tag box of each tag number.

You can use 15 alphanumeric characters. If you do not enter the tag names, the channel

numbers are displayed even if the tag name display is enabled.

Click the Apply button. The setting changes take effect.

3.16 Measured Data Monitor Display/Settings

1 2 ... 182 183 184 185 186 187 188 189 190 191 192 ... 304 305

Žádné komentáře

Yokogawa Standalone MW100 Uživatelský manuál Strana 187