Yokogawa SPS24 Uživatelský manuál stáhnout pdf (Strana 19)

<3. Sensor Management>

3-2

IM 12A01S02-01E 1st Edition : May 10, 2013-00

3.2 [Sensor setup]

Clicking on [Sensor setup] in “Current measurement readings” will display the sensor setting

screen, where settings can be applied to each sensor individually.

For the settings common to pH sensors, go to the pH/ORP common setting in [Setup].

This screen displays values stored in connected sensors. Changed values will be displayed in

red. Click on [Synchronize] to send the new setting to SENCOM sensors.

l [Import setting]

Importssensorsettingdata(excludingCalibration)fromale.

l [Export setting]

Exportssensorsettingdata(excludingCalibration)toale.

Thedefaultlenameisintheformatof“Smart_SensorSetup(yymmddhhmmss).PH”whichcan

bereplacedwithupto255single-bytecharacters(127double-bytecharacters).Alename

cannot contain any of the following characters: + * / ? ” < > |

l [Initialize sensor]

Initializes the setting stored in SENCOM sensors.

Table 3.3 Sensor setting

Item Range Default Remarks

Sensor

settings

Sensor type pH, ORP, pH+ORP pH+ORP

Calibration pH settings Zero -120.0 to 120.0 mV

4.97to9.03pH

0.000 mV

7.00pH

Unit can be selected at the

pH/ORP common settings.

Slope 70.00to110.0%

41.41 to 65.08 mV/pH

100.0 %

59.16 mV/pH

Unit can be selected at the

pH/ORP common settings.

ITP 0.00 to 14.00 pH 7.00pH

pH Auto correct Disable,Enable Disable

ORP/rH

settings

Zero -120.0 to 120.0 mV 0.00 mV

Slope 70.00to110.0% 100.0 %

Temperatutre

compensation

Compensation Manual, Automatic Automatic

Manual

temperature

0.0 to 100.0 degC

32.0 to 212.0 degF

25.0 degC

77.0degF

Process temperature used

for manual compensation

Sensor

diagnostic

settings

Dene

heat cycle

diagnostic

reference

Heat cycle

temperature

1 to 250 degC

34 to 482 degF

50 degC

124 degF

Heat cycle time 0.1 to 60.0 min. 10.0 min.

Dene

SENCOM

diagnostic

reference

High pH value -2.00 to 16.00 pH 13.00 pH

Low pH value -2.00 to 16.00 pH 1.00 pH

Sterilization

temperature

0.0 to 155.0 degC

32.0 to 311.0 degF

155.0 degC

311.0 degF

Sterilization time 0.0 to 100.0 min. 100.0 min.

High temperature 1

-35.0 to 155.0 degC

-31.0 to 311.0 degF

155.0 degC

311.0 degF

High temperature 2

-35.0 to 155.0 degC

-31.0 to 311.0 degF

155.0 degC

311.0 degF

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

Komentáře k této Příručce

Žádné komentáře

Yokogawa SPS24 Uživatelský manuál Strana 19

Komentáře k této Příručce

Související produkty a manuály pro Senzory Yokogawa SPS24