Yokogawa SPS24 Uživatelský manuál stáhnout pdf (Strana 32)

<6. Setup>

6-6

IM 12A01S02-01E 1st Edition : May 10, 2013-00

Temperature

compensation

Reference temperature -30.0 to 140.0 degC

-22.0 to 284.0 degF

25.0 degC

77.0degF

Process

Temp.

compensation

pH None, Temp.

coefcient,Matrix,

NEN6411

None

Setup -0.100 to 0.100 pH/

degC

-0.1 to 0.1 pH/degF

0.000 pH/degC Appears when

“Temp.coefcient”

is selected.

Matrixsettings..

Temperature range:

-30.0 to 140.0 degC

-22.0 to 284.0 degF

pH:

-2.00 to 20.00 pH

(Table6.5) Appears when

“Matrix”isselected.

ORP None, Temp.

coefcient

None

Setup -10.00 to 10.00 mV/

degC

-5.6 to 5.6 mV/degF

0.000 mV/degC Appears when

“Temp.coefcient”

is selected.

Error

display

Impedance 1 too high off, Warnning, Fault off

Impedance 1 too low off, Warnning, Fault off

Impedance 2 too high off, Warnning, Fault off

Impedance 2 too low off, Warnning, Fault off

Dene

SENCOM

diagonostic

reference

FINE limit for impedance 1 1 to 10 MOhm 10.0 MOhm When Impedance 1

is “high*.”

In the case of

“low,” use the value

of Impedance 1

high/low limit in

Impedance settings.

FINE limit for impedance 2 1 to 10 MOhm 10.0 MOhm When Impedance s

is “high*.”

In the case of

“low,” use the value

of Impedance 2

high/low limit in

Impedance settings.

*: In the case of FU20F pH/ORP SENCOM sensors, Impedance 1 is high and Impedance 2 is low.

l Settingforuserdenedbuffer

When“Programmable”isselectedinpHcalibrationsettings–Selectbufferset,theuser-dened

buffersolutioncongurationscreenappears.Congurationcansetfor3buffersolutions.

Beforeconguringanewtable,clickon[Cleartable]toclearallpresetvalues.

Afterentering,execute[Checkvalues]tochecktherearenoerrors.

1 2 ... 27 28 29 30 31 32 33 34 35

Komentáře k této Příručce

Žádné komentáře

Yokogawa SPS24 Uživatelský manuál Strana 32

Komentáře k této Příručce

Související produkty a manuály pro Senzory Yokogawa SPS24