Yokogawa Data Acquisition with PID Control CX2000 Uživatelský manuál stáhnout pdf (Strana 206)

7-14 IM 04L31A01-17E

Example

PTNO 5

SEGNO 10

PRE_SEGNO 2

SEGUSE 7

SEGTM 11:05:22

WAITTM 00:06:00

RCYMOD 1

ALL_RCY 20

REM_RCY 2

RST 3

REN 6

PTN_START_DATE 02/01/03

PTN_START_TIME 10:00:00

PTN_STOP_DATE 02/01/05

PTN_STOP_TIME 10:00:00

Output of PV Event/Time Event Information

• The FK command is used to output the data.

• When in program operation, the statuses of the current PV event and time event are

output. When not in program operation, zeroes are output for the statuses of the PV

event and time event.

Syntax

CRLF

xxx.xxx.xxx.xxx

CRLF

yyy.yyy.yyy.yyy

CRLF

xxx • The statuses of bits 31 to 24, 23 to 16, 15 to 8, and 7 to 0 are

indicated in order in decimal notation.

• The occurrence of PV events 1 to 16 is indicated by the status of

bits 0 to 15. Thus, the upper two digits of xxx are zeroes.

0: Event not occurring, 1: Event occurring

012345

101112131415

6789

Bit

yyy • The statuses of bits 1 to 24, 23 to 16, 15 to 8, and 7 to 0 are

indicated in order in decimal notation.

• The occurrence of time events 1 to 16 is indicated by the status of

bits 0 to 15. Thus, the upper two digits of xxx are zeroes.

0: Event not occurring, 1: Event occurring

Example

When PV event 1 and time events 2 and 3 are occurring.

000.000.000.001

000.000.000.006

7.2 Output Format of ASCII Data

1 2 ... 201 202 203 204 205 206 207 208 209 210 211 ... 320 321

Komentáře k této Příručce

Žádné komentáře

Yokogawa Data Acquisition with PID Control CX2000 Uživatelský manuál Strana 206

Komentáře k této Příručce

Související produkty a manuály pro Senzory Yokogawa Data Acquisition with PID Control CX2000