Yokogawa Data Acquisition with PID Control CX2000 Uživatelský manuál stáhnout pdf (Strana 160)

6-45

M-4659

Configuring the MV1000/MV2000

Index

MODBUS Client

Changes the upper/lower display area

Click to display the channel selection screen

Communication interval

Set the read cycle to 125ms, 250ms, 500ms, 1s, 2s, 5s, or 10s.

Auto recovery

Set the interval for retrying the connection when the connection is interrupted for some

reason. Select OFF, 10s, 20s, 30s, 1min, 2min, 5min, 10min, 20min,30min, or 1h.

Modbus Server setting

• Server No.

Select from 1 to 16 for the server registration numbers to be congured.

• Port No.

Enter the port number in the range of 0 to 65535 for the selected server. The default

value is 502.

• Host Name

Set the destination Modbus server name using up to 64 alphanumeric characters.

• If the DNS is used, you can set the host name as a server name.

• You can also set the IP address. In this case, the DNS is not required.

• Unit

Select [Auto] if the unit number of the destination server is not required; Otherwise,

select [Fixed]. If you select [Fixed], the [Unit No.] item is displayed.

• Unit No.

Enter a xed unit number in the range of 0 to 255.

6.6 Entering Basic Settings

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 285 286

Žádné komentáře

Yokogawa Data Acquisition with PID Control CX2000 Uživatelský manuál Strana 160