Yokogawa Data Acquisition with PID Control CX2000 Uživatelský manuál stáhnout pdf (Strana 82)

4-10

M-4659

Displaying Multiple Y-axis

When multi-axis zone is selected, the Y-axis scales corresponding to the [Y-Axis] boxes

in the [General Display Settings] that are checked will be displayed.

• Adding a Y-axis • Deleting a Y-axis

Drag and drop

Changing the Grid Display

Select the grid type by clicking Grid density on the toolbar, or Y-axis on the menu bar.

Switch the grid density.

Switch the grid density

WaveformDisplayLimit(clip)

When the waveform display limit is enabled by clicking the clip icon or by selecting

[Y-Axis] - [Clip], the Y-axis display range of the waveform are limited to the minimum

and maximum values that were specified under [General Display Settings] - [Scale].

Measured values that are less than the minimum value are set to the minimum value and

values that are greater than the maximum value are set to the maximum value.

• ExampleinwhichDisplayLimitisEnabled

• ExampleinwhichDisplayLimitisDisabled

4.2DisplayingtheWaveform

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 285 286

Žádné komentáře

Yokogawa Data Acquisition with PID Control CX2000 Uživatelský manuál Strana 82