Yokogawa ADMAG AXR Uživatelský manuál stáhnout pdf (Strana 121)

<9. OPERATION VIA HART CONFIGURATION TOOL (HART 7)>

9-2

IM 01E30D01-01EN

CongurationTool,downloadthemfromtheofcial

HART programming sites, otherwise, contact the

respectivevendorsoftheCongurationToolforits

upgrade information.

1. ConrmationofthedevicerevisionforAXR

 ConnecttheCongurationTooltotheAXR.

The device revision can be checked as follows.

[Root Menu]→Review→Review4→Flddevrev

2. Conrmationofthedevicerevisionforthe

HARTCongurationTool

(1) TurnonthepoweroftheCongurationTool

under the standalone condition.

(2) ConrmtheinstalledDDrevisionin

accordance with the procedure of the

CongurationTool.Refertoitsmanualhow

toconrmitindetail.

9.3 InterconnectionbetweenAXRandHARTCongurationTool

TheHARTCongurationToolcaninterfacewiththeAXRfromthecontrolroom,theAXRsite,oranyother

wiringterminationpointintheloop,providedthereisaminimumloadresistanceof250Ωbetweenthe

connectionandthereceivinginstrument.Tocommunicate,itmustbeconnectedinparallelwiththeAXR,and

the connections must be non-polarized. Figure 9.3.1 illustrates the wiring connections for a direct interface at

theAXRsite.TheHARTCongurationToolcanbeusedforremoteaccessfromanyterminalstripaswell.

AXR

F0903.ai

‒

SUPPLY

USB

FieldMate

modem

Relaying

terminals

Distributor

Control room

Terminal

board

USB

PC/FieldMate

Figure 9.3.1 Connecting the HART Communicator

WARNING

Be sure to set parameters as “Protect” on the

writeprotectfunctionafternishofparameter

setting work.

Refer to “Chapter 6 Menu P: Parameter

Protection items” and section “11.3.2” how to use

the write protect function in detail.

IMPORTANT

Ifthepowerofowmeteristurnedoffwithin30

seconds after parameters have been set, these

settings will be canceled. Accordingly, please

keep the power on for at least 30 seconds after

setting parameters.

9.2.2 Device Type Manager (DTM) and

Device Revision

WhenconguretheparametersusingFieldMate,

use the DTM (Device Type Manager) referring to

the following table.

MODEL DTM

Name

Device

Type

Device

Revision

AXR

XRHART7

DTM

AXR

(0x3757)

The device revision can be checked as follows.

[Root Menu]→Review→Review4→Flddevrev

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 193 194

Komentáře k této Příručce

Žádné komentáře

Yokogawa ADMAG AXR Uživatelský manuál Strana 121

Komentáře k této Příručce

Související produkty a manuály pro Senzory Yokogawa ADMAG AXR