Yokogawa ADMAG AXR Uživatelský manuál stáhnout pdf (Strana 64)

<6. PARAMETER DESCRIPTION>

6-16

IM 01E30D01-01EN

6.4 Parameter Description

IMPORTANT

One output can be selected from pulse, alarm, or

status through the parameter setting.

(1) Menu B: Easy Setup items

Those parameters with a high frequency of use

have been grouped together in Easy Setup. All

basic functions can be controlled using only the

parameters from this block. Parameters from

Menu B share identical names with those from

thermenus;however,modicationofonesuch

parameter will result in the other being automatically

modied.

[B10: Language] Selection of language used for

the display unit

→ This setting is linked with that of parameter H30.

One of the following languages can be selected for

the display unit.

Data Range

Setting item Description

English All parameters, alarm messages, etc. displayed

in English.

Japanese All parameters, alarm messages, etc. displayed

in Japanese katakana.

French All parameters, alarm messages, etc. displayed

in French.

German All parameters, alarm messages, etc. displayed

in German.

Italian All parameters, alarm messages, etc. displayed

in Italian.

Spanish All parameters, alarm messages, etc. displayed

in Spanish.

[B20: Flow Damping] Setting of the damping time

constant

→ This setting is linked with that of parameter C11.

Thedampingtimeconstantshouldbemodiedto

suppressanoutputuctuationortochangethe

response time. This time constant has an effect

onanalogoutputandontheowratedisplay(i.e.,

actualinstantaneousowrate,%,currentvalue),

and in addition, it also affects pulse output and

totalization. However, when “No Damping” has

been set for J25:T/PDampSelect, there will be no

effect on pulse output or totalization.

*: Time constant: The time required for the output to reach

63.2% from 0%.

NOTE

When the damping time is short, the output

uctuates.Setthetimeto5secondsormorefor

control loop.

[B21: Base Flow Unit] S

electionofowunitsfor

theowratespan

→ This setting is linked with that of parameter C40.

Thisparameterselectstheowunitsfortheow

ratespan.(Incaseofmassow,thesettingof

density is also required. Refer to C46: Mass Flow

Density for more details.)

[B22: Base Time Unit] Selection of time units for

theowratespan

→ This setting is linked with that of parameter C41.

Thisparameterselectsthetimeunitsfortheow

rate span; however, if “m” has been selected for

theowrateunits,“/s”isautomaticallysetforthis

parameter.

[B23: Flow Span]Settingoftheowratespan

→ThissettingislinkedwiththatofparameterC42.

Thespancanbesetfortheforwardowrateinthe

range 0 to 32,000 (although this does not include 0).

The units set using B21/C40:BaseFlowUnit and

B22/C41:BaseTimeUnit will be displayed at this

time.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 193 194

Komentáře k této Příručce

Žádné komentáře

Yokogawa ADMAG AXR Uživatelský manuál Strana 64

Komentáře k této Příručce

Související produkty a manuály pro Senzory Yokogawa ADMAG AXR